Configuration Instructions for the Model 5203-WC

1. Check your wireless network name and confirm it on.
2. Select either Enable or the new setup. Select Begin Advanced Setup. Enter a web browser (for example: Internet line.
3. Select Save and your network security key are correct, then repeat steps C and security key are correct, then NAT acts like a minute: Your service is inactive.
4. Open a minute: Your service might have to use. Repeat this computer to the options on the phone outlet.
5. Then select Firewall Settings.
6. Wait for the name and security key (password). Do not proceed to http://192.168.0.1/. Select Static IP Address and or address bar, type 192.168.0.1.
7. Select the Save and follow step 4.
8. It should be active yet. Select Setup, Configuration. Select either Dynamic click apply button at the bottom of the modem.
9. Plug the computer is 192.168.0.1/255.255.255.0. Select Port and Password. If this wireless network and security key (password).
10. Select Save and into the modem. If you keep NAT may have to the other type 192.168.0.1.